Tips & Tricks to Resurrect Your Dead iPhone

Too many times, users complain about the iPhone dead issue. If you are also having the same problem with any other device, simply follow these suggestions:

Part 1. Replace your iPhone battery

This might surprise you, but most of the times the iPhone dead battery can cause this problem. If your phone has been overly used or gone through a malfunction, then chances are that its battery could have drained entirely. The good news is that you can resurrect your phone by simply replacing its battery.

If your iPhone is covered by Apple Care, then you can get iPhone dead battery replaced for free (for batteries drained below 80% of their capacity). Else, you can just buy a new battery as well.

Part 2. Check for hardware damage (and charge it)

If your phone has been damaged physically, then it can also make iPhone completely dead at times. A while back, my iPhone 5s dead when it fell in the water. Therefore, if you have also encountered something similar, then you should not take it lightly. Check your phone for any kind of hardware damage in order to get that unit replaced.

Once my iPhone 5 dead because I was using a faulty charging cable. Make sure that you are using an authentic cable to charge your phone and that the charging port is not damaged. There could be some dirt in the port as well. If your phone doesn’t charge, then use another cable or connect it to a different socket to charge iPhone dead battery.

Part 3. Force restart your device

This is one of the easiest solutions to resurrect an iPhone dead. By force restarting your iPhone, you can reset its present power cycle and make it work again. There are different key combinations to force restart a device.

iPhone 6s and older generations

To fix iPhone 6 dead or any other older generation device, press the Home and the Power (wake/sleep) button at the same time. Keep pressing them for at least 10-15 seconds. This will forcefully restart the device.

iPhone 7 and later generations

If you are using a newer generation iPhone, then you can forcefully restart it by pressing the Power (wake/sleep) and the Volume Down button. After pressing the buttons for 10 seconds (or more), your device would be restarted.

Part 4. Restore iPhone in recovery mode

By putting your iPhone in recovery mode and connecting it to iTunes, you can resurrect iPhone completely dead. Though, this will automatically delete all the user data on your phone as well.

1. Firstly, launch an updated version of iTunes on your system and connect one end of the lighting cable to it.

2. Now, put your phone in recovery mode. If you have an iPhone 7 or newer generation device, then long press the Volume Down button for a few seconds. While still holding the button, connect it to a lightning cable. Let go of the button when you see the iTunes symbol on the screen.

3. For iPhone 6s and older generations, the process is pretty similar. The only difference is that instead of Volume Down, you need to long press the Home button and connect it to your system.

4. To resolve iPhone 5s dead, wait for a while and let iTunes detect your device automatically. Once it detects that your device is in recovery mode, it will display the following prompt.

5. Just agree to it and let iTunes reset your device entirely.

6. Most probably the iPhone dead problem will be fixed and your phone will be restarted in normal mode.

Part 5. Update your phone via iTunes

Most of the people know how to update their device using its native interface. Though, if your iPhone is running on an unstable version of iOS, then it can also cause some serious issues. To fix iPhone dead, you can just update it to a stable version of iOS via iTunes.

1. Launch iTunes on your system and connect iPhone to it.

2. Once it has detected your iPhone, select it from the devices option.

3. Go to its “Summary” page and click on the “Check for update” button.

4. Wait for a while as iTunes will check for the latest iOS update.

5. Once it is done, click on the “Update” button and confirm your choice.

Part 6. Fix iPhone dead problem without data loss

Dr.Fone - System Repair provides a fast, reliable, and highly effective way to resolve iPhone dead issue. It is known to have the highest success rate in the industry and can fix your malfunctioning iOS device without any data loss. Having an easy to use interface, it is compatible with all the leading iOS versions and devices out there. You can learn how to fix iPhone completely dead by following these steps:

1. Install Dr.Fone on your computer and launch it whenever you face iPhone dead problem. From the home screen, click on the “System Repair” button.

2. Now, connect your iPhone to the system using a lightning cable. Select "Standard Mode" or "Advanced Mode".

3. The next window will provide some basic details related to your device after Dr.Fone detects your iPhone. After verifying this information, click on the “Start” button.

If your iOS device is connected but not detected by Dr.Fone, you need to put your device in the DFU (Device Firmware Update) Mode. You can simply follow the on-screen instruction to do it.

If you have an iPhone 8 or newer generation models, then press the Power and Volume Down button at the same time. Keep pressing both the buttons for at least 10 seconds. Now, let go of the Power button while still holding the Volume down button.

For older generations, the same can be done by applying the key combination of the Home and the Power button.

4. Uygulamanın güncellemeyi tamamen indirmesi için bir süre beklemeniz gerekebilir.

5. İndirme işlemi tamamlandıktan sonra size bilgi verilecektir. Şimdi, iPhone ölü sorununu çözmek için “Şimdi Düzelt” düğmesine tıklayabilirsiniz.

6. Arkanıza yaslanın ve rahatlayın, çünkü Dr.Fone cihazınızı düzeltmek için gerekli tüm adımları gerçekleştirecektir. Sonunda, telefonunuz normal modda yeniden başlatılacaktır.